Bestop TREKTOP NX GLIDE - Section 3: Install Top Arch; Inserting Top Arch into Rails; Preparing Top Arch Surface

P9 - 54922 Rev. D 0618
Installation Instructions - TREKTOP NX GLIDE 2-Door
© 2018 Bestop, Inc.
Hardware
Install Bow Mount Brackets
Step 2Step 1
486.55
Install Top Arch
Section 3
Top Arch
Qty. 1
Part #483.24
#483.24
Right Side
Right Side
Step 1
Step 2
Insert the Top Arch #483.24 into the slotted
tab on the Door Rail. Insert one end of the
arch, and ex the arch to insert the other end
into the tabbed slot on the opposite side of
the Jeep.
Remove and discard the protective peel-off
strip on the top surface of the Top Arch.
Page 9