What to do if the ingredients are not evenly mixed and/ or baked properly in my Bestron DBM400?
This issue may arise from selecting an incorrect program; ensure you choose the correct program for the bread type you are making. Alternatively, the dough might be too thick, preventing proper kneading. In this case, add sufficient water to achieve the right consistency.
Why does the loaf collapse while baking in my Bestron DBM400 Bread Maker?
The loaf may collapse during baking if the dough is too soft and weak. This can be caused by adding too much water or yeast. Reduce the amount of moisture and/or yeast to prevent this issue.
What to do if the display shows E:01 on my Bestron Bread Maker?
If the display shows 'E:01', it means the temperature inside the bread maker is too high. To resolve this, press the Start/Stop button to halt the bread maker, and then open the lid to let the interior cool down.
Why is the crust too thick on my Bestron DBM400 Bread Maker bread?
A too-thick crust usually means the bread was kept warm for too long, causing it to dry out. Make sure to remove the loaf from the baking tin shortly after the baking time ends.
Why is there a hollow center when I cut my Bestron Bread Maker loaf?
A hollow center in your loaf can occur if too much water and/or yeast was added, or if no salt was added. To fix this, reduce the quantity of moisture and/or yeast, and make sure to add enough salt.
What to do if powder remains in the baking tin of my Bestron Bread Maker?
If you find powder remaining in the baking tin after baking, it means too little water was added. Next time, use more water.
Why is the loaf too small when using my Bestron DBM400?
If your loaf is too small, it could be due to a lack of yeast or the yeast not working properly. Ensure the conditions are suitable for the yeast to activate properly.
What to do if the dough rises above the baking tin in my Bestron Bread Maker?
If the dough rises above the baking tin, it’s likely that too much yeast and/or water was added. Try reducing the amount of moisture and/or yeast in your next attempt.
What to do if the motor makes a sound, but the dough is not being kneaded in my Bestron Bread Maker?
If the motor is running but the dough isn't being kneaded, check that the baking tin has been fitted correctly. Also, ensure that you are carefully measuring out the ingredients for the dough, as the dough might be too stiff.
Read instructions carefully and retain for future reference.
Verify mains voltage, use earthed sockets, and avoid heat sources.
Use indoors on a flat surface, keep hands dry, never immerse.
Table detailing common problems, their causes, and recommended solutions.
Explanation of units used in recipes: ml, g, tsp, Tbsp.
Ingredients and steps for a standard 900g loaf.
Ingredients for white bread, suitable for 900g loaf.
Ingredients for herb bread, suitable for 900g loaf.
Ingredients for wholemeal bread, suitable for 900g loaf.
General| Brand | Bestron |
|---|---|
| Model | DBM400 |
| Category | Bread Maker |
| Language | English |
To Next Page
