Beta LaserMike LASERSPEED 8000 User Manual

LaserSpeed 8000/9000 I/O Module Instruction Handbook
Specifications
Part No. 93342 / Drawing No. 0921-01516 Page 83 of 84 Revision E (Dec 2013)
 Protocol version: ver. 1.10
 Protocol stack supplier: SIEMENS
 Extended functions supported: Diagnostics & User Parameter data,
accessed via mailbox telegram.
 Auto baud rate detection supported. Baud rate range: 9.6 kbit-12Mbit
 Hardware prepared for DP-V1 extensions.
 Save/Load configuration in Flash supported.
Enclosure
IP50
Environmental Conditions
 Indoor use
 Altitude up to 2000m
 Temperature 5C to 40C
 Maximum relative humidity 80% for temperatures up to 31C decreasing
linearly to 50% relative humidity at 40C
 MAINS supply voltage fluctuations up to 10% of nominal voltage
 Transient over-voltage typically present on MAINS supply. NOTE: The
normal level of transient over-voltages is impulse withstand (over-
voltage) CATEGORY II of IED 60364-4-443.
 Applicable rated pollution degree 2.

Beta LaserMike LASERSPEED 8000 Specifications

General

Brand	Beta LaserMike
Model	LASERSPEED 8000
Category	Control Unit
Language	English