Beta RR 2T 2013 - Brake Adjustment: Front Lever and Brake Pedal; Adjusting the Handlebars

4
ADJUSTMENTS
57
GB
ADJUSTING THE HOME POSITION OF
THE CLUTCH LEVER
The adjustment screw 1 allows adjustment
of the distance of lever 2 from the knob.
The empty run is recovered automatically.
ADJUSTING THE HANDLEBARS
The lower bracket 1 can be mounted on
the holes nr. 2, 3 or 4 respectively, while
the handlebar can be rotated by 180° in
order to meet the driver’s specific driving
needs.
ADJUSTING THE HOME POSITION OF
THE FRONT BRAKE LEVER
The home position of brake lever 2 can be
adjusted by means of screw 1.
ADJUSTING THE HOME POSITION OF
THE BRAKE PEDAL
The home position of brake pedal 1 can
be altered by turning adjusting screw 2 af-
ter loosening the counternut located under
dust cap 3. Loosen the counternut and turn
the adjusting screw until the desired height
is obtained. Retighten the counternut after
completing the operation.
1
2
1
2
3
1
2
2
3
4
3
4
1
2