EasyManua.ls Logo

BETAFPV Cetus FPV Kit

BETAFPV Cetus FPV Kit
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Switch SA: Arm/Disarm Quadcopter
l Quadcopter will be disarmed if switch SA is down.
l Quadcopter will be armed if switch SA is up.
Switch SB: Flight Mode of Quadcopter
l The flight mode is “Normal Mode” if switch SB is down (N MODE).
l The flight mode is “Sport Mode” if switch SB is in the middle (S MODE).
l The flight mode is “Manual Mode” if switch SB is up (M MODE).
Switch SC: Speed Threshold of Quadcopter
l It is low gear if switch SC is down (SLOW).
l It is middle gear if switch SC is in the middle (MID).
l It is high gear if switch SC is up (FAST).
Switch SD: Change Video Transmitter (VTX) frequency
Each time the switch SD is toggled, the quadcopter’s video transmitter (VTX) frequency will
switch to the next one. 8 frequencies are available. After switching to the last frequency(5866),
frequency will cycle to the first one(5733) and start again.
The factory default frequencies are 5733/5752/5771/5790/5809/5828/5847/5866 in sequence.
Joystick Functions
Two joysticks (throttle&direction joysticks) on the front of the remote control radio transmitter
control the quadcopter: Ascent/descent (throttle), forward/backward tilt (pitch), left/right tilt (roll),
and rotation of flight direction(yaw).
Throttle (left) Joystick - Ascent/descent (throttle) and rotation of flight direction (yaw).

Related product manuals