Quick Start Guide
Quick Start
Before flying, verify that the remote control radio transmitter is successfully connected with the
quadcopter, all basic controls are functional, and the quadcopter can be taken off normally.
l Step 1: On the remote control radio transmitter, set the throttle joystick and four
switches on the top to the lowest position. Long press the power button on the
remote control radio transmitter for 5 seconds until it beeps three times, then
release. The remote control radio transmitter power indicator will quickly flash red,
then remain blue, which means powered on.
l Step 2: Install the battery into the battery mounting slot under the quadcopter. Ensure
that the direction of the battery interface and that of the quadcopter power cord is
consistent. Connect the quadcopter with the battery, then place the quadcopter on
a horizontal surface. Wait 3-5 seconds until its status LED lights to change from
flashing blue to solid blue. This indicates that the initialization of the quadcopter is
complete and the quadcopter is connected successfully with the remote control
radio transmitter.
To Next Page
Loading...
Need help?
General
