BETAFPV Cetus FPV Kit User Manual

l Step 3: Move switch SA up to arm the quadcopter. The throttle joystick must be at the
lowest position or the quadcopter will not arm. The motors will spin slowly. Move
switch SA down to disarm the quadcopter and the motors will stop spinning.
The completion of these steps verifies that the quadcopter and the remote control radio
transmitter can work normally, and the following flight operations can be continued.

BETAFPV Cetus FPV Kit Specifications

General

Flight Time	4-5 minutes
Wheelbase	75mm
VTX	25mW
Propeller	40mm 3-blade Propeller
Control Range	Up to 80 meters
Battery	1S 450mAh LiPo Battery
Charging Time	30-40 minutes