19
It is recommended to begin flying without using fpv goggles for practice. Be familiar
with the controls and sensitivity of the joysticks by following the above-mentioned
operation steps.
● Disconnect the battery with the quadcopter by removing it from the mounting slot.
Push the power button on the bottom to the left, the LED indicator turns off. This
indicates that the remote control radio transmitter has been powered off.
● Step 5: Land quadcopter steadily and release switch SA to disarm, as shown below:
Caution:
1. Find a suitable open place for the first flight.
2. Push the joysticks slowly, especially the throttle joystick.
3. If the quadcopter becomes out of control or collides with objects, quickly pop-up switch SA to
disarm, and motors will stop spinning.
Joystick Left/Right
Left Right
Pop-up switch SA to disarm the quadcopter
SA
To Next Page
Loading...
