115
The LiteRadio 1 is compatible with two types of joystick heads. When replacing the
joystick head, please be aware NOT to twist the joystick head. Instead, pull it out
directly, then replace the joystick head. As shown below:
Four switches are provided on the front of the remote control radio transmitter: SA, SB,
SC, and SD, as shown below. Pilots can change different statuses and parameters of
the quadcopter. Please take notice that these switches can only work after the remote
control radio transmitter is successfully binded to the quadcopter.
4.1 Switch Functions
Please plug & remove
the joystick head vertically
Note：
Do not twist the
joystick head
To Next Page
Loading...
