133
After the quadcopter has taken off and landed several times, the quadcopter
gyroscope may become offset. This will cause the quadcopter to always tilt in the
same direction during a flight. To fix up it, the quadcopter gyroscope can be recalibrat-
ed. The steps are as follows:
● Turn on the quadcopter and the remote control radio transmitter, and ensure that the
connection is successful;
● Place the quadcopter on a horizontal plane;
● Enter the quadcopter’s OSD menu (Refer “OSD Menu Operation”);
● In the MAIN menu, select CONFIG, then CALI;
● Push the direction joystick to the right to enter level calibration mode. Quadcopter’s
LED flashes blue;
● When the OK prompt appears and the LED returns to solid blue, the calibration is
complete. Pilot can exit the OSD menu.
8.2 Quadcopter Level Calibration
CONFIG
VTX FCC
To Next Page
Loading...
