BETAFPV Cetus Lite - How to Stop after a Collision

138
User needs to manually install driver if PC doesn't install automatically or installed
incorrectly.
● Press switch SA on the remote control radio transmitter immediately once the
quadcopter collides with an object. When the switch SA pop-up, all motors will
immediately stop.
● If the flying altitude is too high and it is difficult to control, please press switch SA
immediately to stop the motor.
9.3 How to Stop After A Collision
DO NOT power on the transmitter first and connect it to the PC. The USB port is invalid in this
situation.
Caution: Press switch SA immediately when the quadcopter is hit or the propellers scratch against
the frame duct.
Pop-up switch SA to disarm the quadcopter
SA