123
Press and hold the Search Key for 1 second to automatically search for the frequency
point with the strongest signal strength in the space to obtain the FPV picture of the
quadcopter.
We can also shortly press the Band Key to switch to the designated band and use the
Chanel Key to switch to the designated channel so that the FPV goggles can work on
the designated frequency point.
Note: Fast charging protocol is not supported. So FPV goggles can not be fast charged.
The FPV goggles have a built-in 2000mAh battery and no external battery is required.
When voltage is below 3.40V, a beep will sound in every 10s and it needs to be
recharged. User can also press the S button to check the voltage. To charge the
goggles battery:
● Turn off the FPV goggles;
● Connect FPV goggles and adapter with the Type-C cable (5V output adapter is
allowed, such as mobile phone charger);
● The power light will be blue when charging and lights out when fully charged.
5.3 Charging the FPV Goggles
Output 5V
Type-C Port
To Next Page
Loading...
