118
The continue working time for full charged battery is about 8 hours.
When battery is fully charged and left being unused within 30 days, battery power can still maintain
about 80%.
Fast charging protocol is not supported. So radio transmitter can not be quickly charged.
Remote control radio transmitter has a built-in 1000mAh battery. When red light
flashes twice and the buzzer alarms twice, indicates that radio transmitter is low
battery and needs to be recharged. Below are the charging methods for reference:
● Turn off the radio transmitter;
● Plug in remote control radio transmitter with adapter by USB cable (5V output
adapter is allowed);
● The LED light breathes in red means charging, while in green means fully charged.
4.3 Charging the Remote Control Radio Transmitter
Joystick Left/Right
Left Right
Output 5V
Type-C Data Cable
To Next Page
Loading...
