137
It is the safest and quickest method to get started using FPV simulator for practicing
FPV flights. LiteRadio 1 remote control radio transmitter supports most of the FPV
simulators on market with comprehensive configuration.
Operation steps below:
● Turn off radio transmitter;
● Connect the transmitter to computer via USB data cable. Wait for the LED light
breathes in red or green;
● Install driver from PC automatically, prompt box pops up after successful installation.
Then, remote control radio transmitter works normally.
9.2 Radio Connecting to Simulator
Caution: Please do not power on the quadcopter when the popeller is deformed, loosen or damanged.
Quadcopter may loose control in flight per situation. User needs to replace the popeller before
performing the next flight.
Type-C Data Cable
FPV Simulator
BETAFPV Joystick
Other devices
Setting up a device
We’re setting up ‘ BETAFPV JoyStick’.
To Next Page
Loading...
