Better BT-1 - 8.2.3 Character Setting Commands; Print Mode Selection (ESC! n)

BT-1 user manual
Page 19 of 70
Decimal:
27 66 n
1B 42 n
Hexadecimal:
Default is 0
0 ≤ m ≤ 47
[Range]
ESC $ nL nH
[Name]
Set absolute print positions
ASCII:
[Format]
ESC $ nL nH
Decimal:
27 36 nL nH
1B 24 nL nH
Hexadecimal:
0≤nL≤255
0≤nH≤255
[Range]
[Description]
Set the distance from the beginning of the line to the position at which
subsequent are to be printed.
The distance from the beginning of the line to the print position is[(nL+nH
×256)×0.125 mm]
[Note]
λ
λ
Settings outside the specified printable area are ignored.
In standard mode, the horizontal motion unit (x) is used.
[Reference]
ESC
\
,
GS $
,
GS
\
8.2.3 Character Set
ting Commands
ESC ! n
[Name]
Select print mode
ASCII:
[Format]
ESC
!
n
Decimal:
27
33 n
21 n
Hexadecimal:
0≤n≤255
1B
[Range]
[Description]
Selects print mode(s) using n as follows:
Bit Off/On Hex
Decimal
Function
0
1
2
3
4
5
Off
On
Off
On
Off
On
Off
On
Off
On
Off
00
01
00
02
00
04
00
08
00
10
00
0
1
0
2
0
4
0
8
0
16
0
Character Font A (12×24).
Character Font B (9×17).
Turn white/black reverse printing mode not selected.
Turn white/black reverse printing mode selected.
Turn on/off upside-down printing mode not selected.
Turn on/off upside-down printing mode selected.
Emphasized mode not selected.
Emphasized mode selected.
Double-height mode not selected.
Double-height mode selected.
Double
-
width mode not selected.
利用 pdfFactory Pro 测试版本创建的PDF文档 www.pdffactory.com