Beurer BM 95 - Adopting the Correct Posture; Starting a Blood Pressure Measurement

48
may vary between the right and left arm, which may mean that the measured blood pressure val-
ues are dierent.
If the values between the two arms are significantly dierent, please consult your doctor to deter-
mine which arm should be used for the measurement.
Warning
The unit may only be operated with the original cu. The cu is suitable for an arm circumference
of 22 up to 42cm.
5.2 Adopting the correct posture
• Before the initial blood pressure measurement, make sure always to rest for about 5 minutes.
Otherwise deviations can occur.
• You can take the measurement while sitting or lying. Always make sure that the cu is at heart level.
• To take your blood pressure, make sure you are sitting comfortably with your arms and back lean-
ing on something. Do not cross your legs. Place your feet flat on the ground.
• To avoid falsifying the measurement, it is important to remain still during the measurement and
not to speak.
• When taking the measurement, please keep the device lying flat (horizontally) on the table.
Wait for at least 1 minute before taking another measurement.
5.3 Start the blood pressure measurement
1. As described above, attach the cu and adopt the correct posture.
2. Press the START/STOP button
to start the blood pressure measurement. The blood pressure
symbol appears on the display and the cu inflates. The heart symbol begins to flash
in sync as soon as the device detects a pulse.