Beurer FT 78 - Technical Specifications; Warranty and Service Information

19
Error message Cause Solution
Battery low; further
measurements are not
possible.
Replace the battery.
Depleted battery: if
the battery symbol is
shown constantly, no
more measurements
are possible.
Replace the battery.
If you cannot fi nd a solution to your problem here, contact our Cus-
tomer Services.
12. Technical data
Temperature range 34.0 – 42.2 °C (93.2 – 108.0 °F)
Measurement accuracy
In the measurement range of 35.0 to
42.2 °C (95.0 to 108.0 °F): +/-0.2 °C (0.4
°F), in other indicating ranges: +/-0.3 °C
(0.5 °F)
Operating temperature
range
10 – 40 °C (50 – 104 °F), humidity ≤ 95%;
700 – 1060hPa
Storage temperature range -25 – 55 °C (-13 – 131 °F), humidity
≤95%; 700 – 1060hPa
Memory 9 memory spaces
Display resolution 0.1
Battery 1 x 3V CR2032 battery
Weight 72 g including battery
Dimensions 153 x 42 x 35 mm
Protective cap 6 pcs
Automatic switch-o 60 seconds
Battery operating life
3,000 measurements in succession or
one year with one to two measurements
per day, including standby mode.
Clinical reproducibility
0.08 °C (< 1 year old), 0.10 °C (1 – 5 years
old), 0.07 °C (>5 years old)
IP classifi cation IP 22, protection against harmful ingress
of water and dust
13. Warranty / Service
Beurer GmbH,Söfl inger Straße 218, 89077 Ulm, Germany (hereinafter
referred to as “Beurer”) provides a warranty for this product, subject to
the requirements below and to the extent described as follows.
The warranty conditions below shall not a ect the seller’s statu-
tory warranty obligations which ensue from the sales agreement
with the buyer.
The warranty shall apply without prejudice to any mandatory
statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this
product.
The worldwide warranty period is 5 years, commencing from the
purchase of the new, unused product from the seller.