Beurer FT90 - Device Description and Components

8
EN
Non-contact forehead thermometer FT 90
Beurer tip
Taking the body temperature provides a current measurement of a person’s
temperature. If you are uncertain about interpreting the results or if the values are
abnormal (e.g. fever), please consult your doctor. This also applies in the case of
slight temperature changes if there are other symptoms of illness such as agitation,
severe sweating, flushed skin, fast pulse rate, tendency to collapse, etc.
4. Device description
1
Display
2
MODE/MEM button
3
On/Off button
4
LIGHT/SET button
5
Start-measurement button
6
Measuring sensor
7
Battery compartment lock
8
Battery compartment lid
Buttons Functions
Turns the device on and off.
Start
Starts the temperature measu-
rement.
MODE/MEM (short)
MODE/MEM (5 sec.)
Sets the measurement mode.
Displays stored measurements.
LIGHT/SET (short)
LIGHT/SET (long)
Manual switch on of the illumi-
nated display.
Sets the basic functions.
Start
MODE
MEM
LIGHT
SE T
1
3
2
4
5
6
7
8