55
english
Connection MCS 563 Connection MCS 563 L
ATTENTION:
For the connection of microphone units to the MCS Control Unit and for connection from microphone unit to microphone unit use
only connecting cables recommended by beyerdynamic (refer also to the chapter “Optional Accessories”).
If you use other cables make sure that you use cables with the correct wiring (refer also to the chapter “Technical Specifications”,
otherwise the microphone units and the control unit may be damaged. This will invalidate the guarantee.
Important:
The power cable and signal conducting cables must run in a sufficient distance to each other and to the microphone unit.
To Next Page
Loading...
