16 Connectivity and Information Commands
v - Version information
This parameter is represented by six digits. The latter are to be read as hexadecimal
numbers, with a division into four number groups as described in the following section:
Digits 1 and 2 represent the two decimal places of the
PnP version number as
hexadecimal numbers
; to obtain the PnP version number a 1. must be placed in front of
this number.
Digits 3 and 4 represent the
major firmware number including the firmware revision
number
, insofar as digit 3 indicates the major firmware number and digit 4 the revision
number corresponding to the major firmware number. Digits 5 and 6 represent the
firmware build
. All together the firmware information is represented with digits 3 to 6 as
the following: 3.4.56.
Example
Receive: <CR><LF>
X 00021E 0131 7A 241100<CR><LF>
>
Parameter Explanations
x
command for MU status information
00021E
muad in hex MU ID = 542
0131
HWType: Double MU (2 buttons)
MUZone: 0x3 (corresponds to zone 4 in Quinta PC-software)
AllocationMode (Function): Double Delegate
7A
BatLevel: 60%, best RF level, charger OFF, no error
241100
PnPVersion: 0x24 = 36
dec
1.36
FWVersion: 1.1.00
To Next Page
Loading...
