Beyerdynamic QUINTA Series - Page 30

30 System Configuration Commands
3.7 s commands
Get/Set Custom Strings for priority mode 7
This command group is used to set the freely adjustable custom string for the function
key of the chairman station.
Important Note
This function mode is called priority mode 7 in this document, although it is listed in the
software under the number 8. This is because the Quinta protocol starts counting from
0 when selecting function modes, while the display in the software starts counting from
1. Please note this fact!
Communication direction
Controller -> CU
Syntax
Description
s
Get Custom Strings
s 0 str
Set Custom String 0
s 1 str
Set Custom String 1
Parameters
Description
str
String of max. 15 ASCII-characters