Beyerdynamic QUINTA Series - Page 33

33 System Configuration Commands
Examples
Get & Set Ethernet TCP/IP configuration
Transmit:
c<CR>
This command gets the currently set Ethernet
TCP/IP configuration.
Receive:
<CR><LF>
MAC=00:22:BB:30:00:05<CR><LF>
IP=10.49.12.177<CR><LF>
IPMASK=255.255.0.0<CR><LF>
GTW=10.49.0.254<CR><LF>
DHCPEn=0<CR><LF>
>
Transmit:
c 5 1<CR>
This command enables DHCP.
Receive:
<CR><LF>
>
Transmit:
c 2 3701A8C0<CR>
This command sets the IP address to
192.168.1.55, as it is entered in hexadecimal
numbers in reverse byte order: 0x3701A8C0.
Receive:
<CR><LF>
>
Transmit:
c<CR>
This command gets the currently set Ethernet
TCP/IP configuration.
Receive:
<CR><LF>
MAC=00:22:BB:30:00:05<CR><LF>
IP=55.1.168.192<CR><LF>
IPMASK=255.255.0.0<CR><LF>
GTW=10.49.0.254<CR><LF>
DHCPEn=0<CR><LF>
>