Beyerdynamic QUINTA Series - ~Q Commands - Clear Speak Request on MUs

43 Conference Control Commands
4.6 ~Q commands
Clear speak request on MUs
The ~Q 00 and ~Q 10 commands are used to clear MU (single and double delegate)
speak requests.
Important Note
The ~Q command can be executed in broadcast as well as in unicast mode; please
refer to chapter 3.2 for details. Since it is common practice to clear only one particular
MU speak request, an application of this command structure in unicast mode is not
unlikely.
Without selecting a specific MU with the M command, the system is in broadcast mode
by default and all MUs are addressed.
Communication direction
Controller -> CU -> MU
Syntax
Description
~Q 00
Clears single delegate and double delegate (left
button) speak request
~Q 10
Clears single delegate and double delegate (right
button) speak request
Example
Clear Single Delegate
and Double Delegate (left button) MUs
Transmit:
~Q 00<CR>
Receive:
<CR><LF>
>