Beyerdynamic QUINTA Series - Page 45

45 Conference Control Commands
Example
Receive: <CR><LF>
l 00<CR><LF>
PrioMode=0<CR><LF> Priority mode 1 (displayed as 0) is set.
Prio on<CR><LF> Priority mode 1 is on.
m
>
<CR><LF>
l 00<CR><LF>
PrioMode=0<CR><LF> Priority mode 1 (displayed as 0) is set.
Prio off<CR><LF> Priority mode 1 is off.
>
 Priority Mode 5 (resp. 4) works with the same syntax.
Receive: <CR><LF>
l 00<CR><LF>
PrioMode=1<CR><LF> Priority mode 2 (displayed as 1) is set.
Prio on<CR><LF> Priority mode 2 is on.
>
<CR><LF>
l 00<CR><LF>
PrioMode=1<CR><LF> Priority mode 2 (displayed as 1) is set.
Prio off<CR><LF> Priority mode 2 is on.
>
 Priority Mode 4 (resp. 3) and 6 (resp. 5) work with the same syntax.
Receive: <CR><LF>
l 00<CR><LF>
m<CR><LF>
PrioMode=2<CR><LF> Priority mode 3 (displayed as 2) is set.
> Func button has been pressed.