Beyerdynamic XELENTO REMOTE - Inserting and Wearing Xelento Remote; Maintaining Eartips; Cable Clip Usage

13/18Inseing and wearing Xelento remote
English
Maintaining eaips
The eaips on your in-ear headphones should be cleaned regularly and then dried with
the microfibre cleaning cloth provided.
► For cleaning inructions, see “Cleaning” on page 17.
INSERTING AND WEARING XELENTO REMOTE
Due to the anatomical shape of the earphone housing, the cable of the Xelento remote
is routed behind the ear. This way of wearing the earphones eectively suppresses cable
noise, and the earphones sit firmly in the ear even when the cable is pulled.
► Inse the earphones into your ears and guide the cable
upwards behind your ears.
The right-hand cable end has a small, raised dot to mark
the right-hand side.
Cable clip
You can use the cable clip supplied to secure the jack lead of your Xelento remote in-ear
headphones.
This prevents the cable from getting tangled and avoids unwanted noise when using the
microphone, for example, while talking on the phone.