BFGoodrich PS-823 - Cover Assembly Replacement; Preparation for Use or Storage

BFGoodrich
Avionics
Systems, Inc.
Component Maintenance Manual
P/N
501-1075-()
D. If
Battery Pack
A1B2
is
not present, mount
Support
Bracket Assembly
(25)
inposition inside
Chassis (220)
E. Place
and tighten Support
Bracket
Assembly
fasteners (30).
9. Cover
Assembly
Replacement
A.
Place
Cover
Assembly
into position onto the Chassis
(220).
B. Place
and tighten the
Cover
Assembly
fasteners (15 and 20).
10.
Preparation
For Use Or
Storage
Prior
to returning
unit
to
service
or storage,
verify the
electrical
serviceability of reassembled
power
supply
by
performing appropriate testing
and charging
procedures in
the Test And Fault
Isolation
section.
If
unit is
to be stored,
cover Jl connector
pins with dust
cap
P/N
563-1725-0l
and
place
unit
inthe
original
shipping container (or
equivalent) for storage. See
Test and
Fault
Isolation
section,
PS-
823 Storage,
Paragraph 6, for charging
requirements of units in storage.
msmljtp202Assemblydiskl59
24-20-03
Page
703
Revision A
June
30,
1999