Need help?Do you have a question about the BIG ASS FANS i6 and is the answer not in the manual?
General| Brand | BIG ASS FANS |
|---|---|
| Model | i6 |
| Category | Fan |
| Language | English |
Read instructions, turn off power, and understand warnings.
Collect necessary tools and verify outlet box suitability for fan support.
Review specific instructions if using 0-10V control.
Attach the mounting bracket to the ceiling or outlet box.
Connect safety cable, ground wire, and wiring harnesses to motor unit.
Attach the downrod to the motor unit, ensuring wires are routed correctly.
Secure the motor cover over the motor unit using bolts.
Suspend the fan from the mounting bracket, aligning components.
Connect fan wires from downrod to supply power wires.
Secure the safety cable to the building structure or mounting bracket.
Slide and tighten fan blades (airfoils) onto the motor unit.
Attach the mounting plate and connect the wiring harness.
Prepare the wiring cover for installation.
Suspend the fan from the mounting plate.
Slide and tighten fan blades (airfoils) onto the motor unit.
Connect and install the light kit or lower cover.
Install the necessary 0-10V control system.
Connect the fan wiring for 0-10V operation.
Find contact details for the manufacturer and customer support.
To Next Page