www.bigstone-nj.com
Address：NO.38 Ningliu Road, Pukou District, Nanjing City, China
Tel：025-89618445
Fax：025 – 58849541
Email: bigstone.ebike@gmail.com
8. PAS LEVEL SELECTION
Click UP or DOWN to change the stages and output power ratio, the
default mode is mode 6 and it’s output power range from level 1 to
level 6 (mode 3 and mode 9 can be customized), the default value is
level 1 .
9. ERROR CODE INDICATOR
If there is something wrong with the electronic control system, the
display will flash at 1 HZ and show the error code automatically.
Different error code is corresponding with different error information.
See the last page Error code table for details.
To Next Page
Loading...
