BIGSTONE D400 - Error Information

Nanjing Bigstone Electronic
&Technology Co., Ltd
Doc. No
QD-JS-D400-001
Version
B01
page 23/27 pages in total
9. Error information
After power on, under the basic function display screen, when a fault occurs, the
error code is displayed. The error code is displayed as follows:
The V5S protocol fault code comparison table is as follows:
Error code
Definition
0
Normal
1
Current error or MOS damaged
2
Throttle error
3
Motor no phase position
4
Motor hall error
5
Brake error (Boot detection)
6
Under voltage
7
Motor stalled stop protection
8
Communication display receiving error
9
Communication error