To Next PageTo Next Page
Need help?Do you have a question about the BigTimeClocks 180 and is the answer not in the manual?
General| Brand | BigTimeClocks |
|---|---|
| Model | 180 |
| Category | Timer |
| Language | English |
Timer counts down from a set time.
Timer counts up from zero to a set time.
Measures elapsed time with race result storage.
Supports sequential programs for exercise/training.
Counts down to zero then counts up.
Programmable timer for races, starts from any time.
Displays the current time.
Two loudness settings available via a side switch.
Set a 10-second countdown preparation for programs.
Automatically repeat countdown or count up programs.
Mute buzzer; clock flashes when pre-set time is reached.
View clock time for 3 seconds without stopping program.
Direct entry of time via keypad, not digit by digit.
Operating functions continue during power interruption.
Stores and allows viewing of 9 race results.
Side switch controls beeper loudness, not power.
Store programs for quick recall at the press of a button.
Dedicated storage for Countdown, Count up, and Interval timers.
9-position storage for any function, countdown, count up, or interval.
Clock powers on immediately; icons indicate functions like ON, Ready, Repeat.
Supports various modes; navigate between programs using 'clock' or 'exit' keys.
Stores 6 programs plus 9 with F3 button.
Remote uses 2 AAA batteries.
7-10 year backup battery maintains time, does not power display.
Functions continue operating during power cuts.
Mark remotes and clocks to avoid confusion.
Instructions to register remote if not operating clock.
Synchronize multiple clocks to operate together with one remote.
Restore independent operation for clocks after synchronization.
Press the 'RED' power key to turn the clock on.
Use 'SHIFT' key to toggle between 12-hour and 24-hour formats.
Default HH:MM:SS format; access via 'Clock' key.
Use 'Set/Save' and arrow keys to set hour, minute, second.
Press the DOWN arrow key to enter countdown mode.
Use 'Set/Save' and number keys to set time.
Press F1, F2, or F3 to store the program for future use.
Press F1, F2, or F3 to view stored values.
Press 'REPEAT' to set or cancel automatic program repeat.
Press 'READY' to set or cancel 10-second countdown preparation.
Press 'OK' key to start or stop the function.
Press 'OK' to stop flashing digits after program completion.
Press 'Shift' to view time for 3 seconds during operation.
Press the UP arrow key to enter count up mode.
Use 'Set/Save' and number keys to set time.
Press F4, F5, or F3 to store the program for future use.
Press F3, F4, or F5 to view stored values.
Press 'REPEAT' to set or cancel automatic program repeat.
Press 'READY' to set or cancel 10-second countdown preparation.
Press 'OK' key to start or stop the function.
Press 'OK' to stop flashing digits after program completion.
Press 'Shift' to view time for 3 seconds during operation.
Press 'SW' to enter stopwatch mode.
Press 'Reset' or 'SW' key to clear stopwatch data.
Press 'OK' key to start or pause the stopwatch.
Press 'Shift' to view time for 3 seconds during operation.
Save 1-9 results by pressing '0' during recording.
Press 'OK' to pause or stop the stopwatch.
Press numbers 1-9 to view individual records.
Press '0' to clear all stored records.
Press F6 to enter Race Clock Timer function.
Set and save the start time for the race clock.
Set and save the end time for the race clock.
Press the 'OK' key to start the Race Clock Timer.
Press 'INT' key to access the Interval Timer function.
Clock displays H1 00:00:00 upon entering setting.
Set the working time (H1) for exercise using number keys.
Set the resting time (H2) using number keys.
Enter the number of times (H3) the program should repeat.
Store the program using F3, F7, or F8 keys.
Press 'OK' key to start or pause the interval program.
Press 'OK' to stop flashing digits after program completion.
Press 'Shift' to view time for 3 seconds during operation.
Press 'SW' to exit and switch to another program.
Counts down to zero then counts up, showing overtime.
Use 'Set/Save' to set the countdown time.
Set the count up time limit using 'Set/Save'.
Timer functions continue during power cuts.
Control buzzer mute and set number of beeps (0-9).
Two loudness options via side switch.
Add/cancel 10 seconds preparation for count up, countdown, interval.
Auto repeat indicated by star light; program repeats after finishing.
Access stored programs (F1-F8) which automatically switch function.
LED on remote flashes when battery is too low.
Connect an external siren for increased volume; max 12V, 1A.
Two holes on the back for wall hanging or tripod mounting.
