BIGTREETECH Eddy V1.0 - Revision Log

BIGTREETECH Eddy V1.0 User Manual
2
Revision Log
Version
Date
Revisions
v1.00
April 19th, 2024
Initial Version
v1.01
April 25th, 2024
1. Mark the BOOT button's location on the
product image.
2. Added instructions for restarting Klipper.
v1.02
April 26th, 2024
Include methods for updating firmware via
computer.
v1.03
April 30th, 2024
Revised the configuration and calibration
instructions.
v1.04
May 15th, 2024
Indicated the position of the center point.
v1.05
June 6th, 2024
Added the z_virtual_endstop instruction to
Section 5.1: Important Notes.
v1.06
August 19th, 2024
Merged Klipper branch and adjusted Z-offset
configuration.