Need help?Do you have a question about the BIGTREETECH MMB CAN V1.0 and is the answer not in the manual?
General| Product Name | BIGTREETECH MMB CAN V1.0 |
|---|---|
| Category | Computer Hardware |
| Interface | CAN |
| Communication Interface | CAN Bus |
| Output Voltage | 5V |
| Output Current | 3A |
| Compatibility | 3D printers |
| Input Voltage | 12V-24V |
Detailed mapping of board pins and their functions for connectivity and component identification.
Explains how to power the board via USB, detailing the VUSB terminal and jumper usage.
Illustrates the correct procedure for connecting servo motors to the MMB CAN board.
Details the wiring instructions for connecting RGB-WS2812 LED strips to the board.
Guides on connecting various sensors, such as the CRT5000 infrared sensor.
Shows how to wire I2C sensors, like the AHT10 temperature and humidity sensor.
Explains the connection process for endstop sensors, including Hall effect sensors.
Step-by-step guide to flash the CanBoot firmware, enabling direct MCU updates via CAN bus.
Instructions on compiling Klipper firmware, including necessary configuration steps.
Details the configuration settings required for compiling Klipper firmware.
To Next Page
