BIGTREETECH MMB CAN V1.0 User Manual
15
Configuring Klipper
1. In your computer's web browser, enter the Raspberry Pi's IP address, and
as shown in the path below, download the reference configuration file
sample-bigtreetech-mmb-canbus.cfg. If the file is not available, update
Klipper firmware to the latest version or download from:
https://github.com/bigtreetech/MMB
2. Upload the configuration file to Configuration Files.
3. Add the board configuration to the "printer.cfg" file:
[include sample-bigtreetech-mmb-canbus.cfg]
4. Modify the ID number in the configuration file to match the actual ID of the
board (USB serial or canbus).
5. Configure the module's specific functions according to the instructions at
https://www.klipper3d.org/Overview.html
To Previous Page
Loading...
Need help?
General
