BIGTREETECH MMB CAN V1.0 User Manual

BIGTREETECH MMB CAN V1.0 User Manual
9
Klipper Firmware
Flashing CANBOOT
Note: CanBoot is for updating MCU firmware directly via CAN bus. If you prefer
DFU, skip this step.
To flash CanBoot on Raspberry Pi or CB1, follow the instructions at
https://github.com/Arksine/CanBoot
1. Enter
cd ~
Navigate to the main directory and input
git clone https://github.com/Arksine/CanBoot
to download the CanBoot project. Then enter
cd CanBoot
navigate to the CanBoot directory.
2. Enter
make menuconfig
configure as shown in the provided image:
3. Enter make to compile the firmware. The resulting canboot.bin file will be
in the home/biqu/CanBoot/out folder. This can be directly downloaded to

BIGTREETECH MMB CAN V1.0 Specifications

General

Brand	BIGTREETECH
Model	MMB CAN V1.0
Category	Computer Hardware
Language	English