Need help?Do you have a question about the BIGTREETECH CB1 and is the answer not in the manual?
General| Processor | Allwinner H616 |
|---|---|
| CPU Cores | 4 |
| CPU Frequency | 1.5GHz |
| Power Supply | 5V/3A |
| GPIO | 40-pin GPIO header |
| GPU | Mali-G31 MP2 |
| RAM | 1GB |
| Connectivity | Wi-Fi, Bluetooth |
| Ethernet | 100M Ethernet |
| Video Output | HDMI |
| Operating System | Linux |
Details the key hardware specifications and capabilities of the BIGTREETECH CB1 board.
Lists the physical dimensions, input voltage, output voltage, and WiFi standards of the CB1.
Provides a visual representation of the CB1 board's physical dimensions and mounting points.
Detailed listing of all pins on the CB1, including their connector, signal, and function.
Instructions for connecting the CB1 to a motherboard using the BTB (Board-to-Board) connection.
Details the 40-pin GPIO arrangement and pin mapping for the CB1 on Manta motherboards.
Provides the URL to download the required operating system image for the CB1.
Lists and links to recommended software for writing OS images to MicroSD cards.
Guides on writing the OS image to a MicroSD card using different software tools.
Explains the plug-and-play setup for network connectivity using an Ethernet cable.
Details how to configure WiFi settings by editing the system.cfg file on the MicroSD card.
Step-by-step guide on how to establish an SSH connection to the CB1 for advanced configuration.
Instructions for compiling custom firmware for the microcontroller connected to the CB1.
To Next Page
