32
Username: Enter the username provided by your service provider.
Password: Enter the password provided by your service provider.
PIN: PIN stands for Personal Identification Number. A PIN code is a numeric value used
in certain systems as a password to gain access, and authenticate. In mobile phones a PIN
code locks the SIM card until you enter the correct code. If you enter the PIN code
incorrectly into the phone 3 times in a row, then the SIM card will be blocked and you will
require a PUK code from your network/service provider.
ADSL Mode ( Main Port : ADSL )
PPPoE Connection
PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services
using PPP.
VPI/VCI: Enter the VPI and VCI information provided by your ISP.
Username: Enter the username provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive). This is in the format of “username@ispname”
instead of simply “username”.
Password: Enter the password provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive)
Service Name: This item is for identification purposes. If it is required, your ISP
provides you the information. Maximum input is 15 alphanumeric characters.
Encap. method: Select the encapsulation format, the default is LLC. Select the one
To Next Page
