Binary B-900-MOIP-4K-CTRL - Verify Jumbo Frame; Setup the MoIP Controller

10
3. Verify Jumbo Frame
Choose SETTINGS > PORTS, then verify Jumbo Frame is set to greater than 8,000 Bytes. The
default value is 9216 (the maximum) and is acceptable.
4. Setup the MoIP Controller
Claim MoIP controller on OvrC and access the local UI.
IMPORTANT: This is REQUIRED for rmware maintenance.
1. For existing OvrC locations:
a. Log into OvrC and go to Customer>Devices
b. A new device will show ready to add. Click “+ Device”, > ‘Media Devices’ and follow the
prompts to claim the MoIP controller.