Ringer volume
and melody
The base unit has eight ringer volume levels, including
0 for off; and eight ringer melodies. With the volume set
to 0, the base unit will not ring for an incoming call.
To change the volume:
1 Press the PROG button then 2 1 1
2 Use the ▲ or ▼ button to change the
volume
3 Press the PHONE button to confirm
To change the melody:
1 Press the PROG button then 2 1 2
2 Use the ▲ or ▼ button to change the
melody
3 Press the PHONE button to confirm
Call barring You can set call barring for individual handsets
registered to your base unit. Your options are:
■
to bar calls to up to two specific numbers (which
can be dialling codes) with up to eight digits each
■
to bar certain types of call — no outside calls, or no
international calls
Customising your base unit
28
To bar calls to specific numbers
1 Press the PROG button then 2 2 2
2 Key in the handset number (1 to 6)
3 Press 1 1
4 Key in the first barred number
5 Press the PHONE button to confirm
6 Press the PROG button then 2 2 2
7 Key in the handset number (1 to 6)
8 Press 1 2
9 Key in the second barred number
10 Press the PHONE button to confirm
To turn the barring on and off:
1 Press the PROG button then 2 2 2
2 Key in the handset number (1 to 6)
3 Press 0 then use the ▲ or ▼ button to set:
0 for call barring off
1 for call barring on
4 Press the PHONE button to confirm
Customising your base unit
Binatone Help Line: 01325 304 473 29
To Next Page
Loading...
