What to do if my Binder Accessories chamber has no function?
If your Binder Accessories chamber isn't working, start by checking the power supply connection and ensuring it's properly connected. Verify that the voltage matches the required 100-120V or 200-240V. Also, inspect the chamber fuse and replace it if necessary. If the fuse blows again, it's recommended to contact Binder service.
What does message "Sensor rupture" mean on my Binder KB 240-UL (E6)?
If you see a "Sensor rupture" message on your Binder Accessories, it indicates a sensor rupture between the sensor and controller or a defective Pt100 sensor. It is recommended to contact BINDER service.
Why is the refrigerating performance low on my Binder KB 240-UL (E6)?
If your Binder Accessories has low refrigerating performance, first check if the ambient temperature is above 25 °C / 77 °F. If so, select a cooler place for installation. Also, consider if there's too much external heat load and reduce it.
How to unlock my Binder KB 240-UL (E6) if it shows "Key lock activated"?
If your Binder Accessories displays "Key lock activated" and you can't operate the controller, enter the key lock password.
Essential safety guidelines for chamber installation and operation.
Detailed instructions for connecting the chamber to the power supply.
Saving chamber data and settings to a USB storage device.
Summary of potential alarm conditions and their causes.
Details on the electronic over-temperature safety controller.
General| Brand | Binder |
|---|---|
| Model | KB 240-UL (E6) |
| Category | Accessories |
| Language | English |
To Next Page