44
14. EC DECLARATION OF CONFORMITY
We: ITW Oberflächentechnik GmbH & Co. KG
Justus-von-Liebig-Str. 31
63128 Dietzenbach
Germany
As the representative/manufacturer of the items listed below:
High-Pressure Paint Pump Models BINKS
HP 4/20, HP 3/28, HP 4/32, HP 10/32, HP 6/34, HP 25/48, HP 6/60,
HP 20/66, HP 30/32, HP 30/75
Declare, under our sole responsibility, that the equipment to which this document relates is in
conformity with the following standards or other normative documents:
EN 292 1-2, EN 1953, EN 12621, EN 13463 1-8:2001
And thereby conform to the protection requirements of Council Directive 89/392/EEC relating
to Machinery Safety Directive and council Directive 94/9/EC relating to Equipment and
Protective Systems intended for use in Potentially Explosive Atmospheres protection
level II 2 G X.
Issued on: 10/07/03
Authorised by:
General Manager
To Next Page
Loading...
