9
least 5 m between the spray jet outlet and any possible source of ignition (the spray mist is ig-
nitable and there is a risk of fire or explosion).
6. The spray material leaves the nozzle under pressure. Do not direct the spray jet towards peo-
ple or animals, as this could cause injuries. If the skin is broken and comes into contact with
paint, lacquer or solvent, there is a risk of infection. Consult a doctor immediately to obtain pro-
fessional, expert treatment. Tell the doctor which spray material or solvent is involved. Present
the safety data sheet.
7. Be aware that working with sprays may produce vapours which can damage your health (see
information on the safety data sheet and the tins of material). You must therefore use a per-
sonal breathing equipment, as indicated by the spray material manufacturer. Keep children and
all people right away from the work area.
8. Keep the BINKS airless pump in a safe place to which children and unauthorised persons do
not have access. Make sure that unauthorised personnel (and children in particular) cannot
start up the BINKS airless pump.
9. Store the BINKS airless pump in a dry place.
10. Use only original BINKS accessories and original BINKS replacement parts.
11. Repair work must only be carried out by authorised specialised companies or by ITW
Oberflächentechnik. You can obtain the addresses of specialised companies from ITW
Oberflächentechnik or from your specialised dealer.
12. When repairing and mounting the pump it is necessary that all connections are clean and
mounted correctly.
Before re-starting the pump the correct resistance (1 MO) must be measured.
The resistance has to be determined between foot valve and upper top point of the pump.
13. You must be careful when carrying out spraying work, not to direct the jet towards the
BINKS airless pump unit.
14. Dispose of cleaning and spraying material waste in accordance with the information provided
by the respective spray material and solvent manufacturers.
15. If work is interrupted, to change the nozzle, for example, lock the safety lever on the airless gun.
Release pressure from the system.
To Next Page
Loading...
