EN
Inspect and replace if required:
Pilot Air Valves & Main Air Valve Parts.
Maintenance schedule
Daily Check for any general fluid or air leakage.
Weekly
Inspect Pump for Correct operation
Check for any excessive mechanical noise
Check for excessive fluid pressure pulsation
Perform a pump stall test to ensure correct operation.
If pump does not stall, check fluid piston seals and ball checks, replace as
required.
12 to 36 Months (Typically 10
million pump cycles
dependant on air quality and
abrasiveness of the paint
used)
Replace air piston seal,
Replace shaft seals & bearings.
Replace fluid piston seal,
Replace Balls,Seats and Bellows.
If air is escaping through exhaust, check air motor piston seal and quick exhaust
diaphragm, replace as required.
6 Month Test
OperationInspection
77-3235 R4.6 18/24 www.carlisleft.com
To Next Page
Loading...
