EN
This product should be flushed with a suitable compatible solvent prior to use.
The wall mount bracket is included with all pumps.
If an air lubricator is used then, this must be maintained.
Installation
Connect a suitable 3/8" NB air hose and 1/2” Pressure Filter Regulator to the air motor.
Attach suitable flexible hoses to the inlet and outlet connections.
(Filter rated at minimum 1000 l/min)
No additional air lubrication is required as piston ring lubricant is applied during assembly or repair.
The Pump Mounting bracket must be connected to a suitable earth ground to ensure that there is no
possibility of static build up.
Mount the pump securely and position the pump at a convenient height (below the lid height of the
paint container), to allow for maintenance, visual observation, and periodic inspection.
77-3235 R4.6 6/24 www.carlisleft.com
To Next Page
Loading...
