EN
1
Smear loctite 572 over nose of bellows,
thread nut onto bellows ensuring the
thread starts squarely. Grip bellows
lightly by hand and tighten the nut with
a 1" A/F spanner until the nut contacts
the bellows shoulder.
Using Item No. 1, push bellows over
spigot until located in groove.
Screw Item No. 2 (assembly spigot)
onto the piston shaft
Bellows Replacement
ITEM PART NO. DESCRIPTION QTY REMARKS
1 502769 Bellows positioning tool 1
2 502382 Bellows assembly spigot
12
77-3235 R4.6 19/24 www.carlisleft.com
To Next Page
Loading...
