Binks TROPHY SERIES - Page 8

77-3049-R2.1 (12/2014)
8 / 20
EN
PRESSURE AND
SIPHON GUN
ORIFICE SIZES
50 0.50 MM
85 0.85 MM
10 1.0 MM
12 1.2 MM
14 1.4 MM
16 1.6 MM
18 1.8 MM
20 2.0 MM
22 2.2 MM
24 2.4 MM
26 2.6 MM
0 FOR FUTURE USE
3465 – XXXX – XXXX
NEEDLE MATERIAL
S STAINLESS
V VITREOUS (TUNGSTEN
CARBIDE NEEDLE &
NOZZLE)
P PLASTIC TIP
AIR CAP DESIGNATION
10 Series CONVENTIONAL
20 Series LVMP
30 Series HVLP
ATOMIZATION
TECHNOLOGY
CN CONVENTIONAL
LV LVMP
HV HVLP
NUMBERING SYSTEM FOR BINKS AUTOMATIC
“TROPHY” SERIES SPRAY GUNS
See charts on pages 8-9 for complete gun assemblies.
CHART 2:
STAINLESS STEEL FEATHERING
NEEDLES AND NOZZLES – OPTIONAL
FEATHERING
NEEDLE
PART NO.
MARKING
ON THE
NEEDLE
MATCHING NOZZLE P/N
(ORIFICE SIZE)
47-6864 I IIII 45-11050-12 1.2MM (.047")
47-6865 II IIII 45-11050-14 1.4MM (.055")
47-6866 III IIII 45-11050-18 1.8MM (.071")
CHART 3:
TUNGSTEN CARBIDE
NOZZLES AND NEEDLES
NOZZLE SIZE TC NOZZLE P.N. TC NEEDLE P.N.
1.4 MM (.055") 45-11080-14 47-6861
1.8 MM (.071") 45-11080-18 47-6861
2.2 MM (.086") 45-11080-22 47-6861
2.6 MM (.102") 45-11080-26 47-6861
CHART 4:
STAINLESS STEEL (HARDENED)
FLUID NOZZLES – STD.
STAINLESS FLUID NOZZLE
ORIFICE SIZE
FLUID NOZZLE
PART NUMBER
.020" .50 mm 45-11050-50
.035" .85 mm 45-11050-85
.039" 1.0 mm 45-11050-10
.047" 1.2 mm 45-11050-12
.055" 1.4 mm 45-11050-14
.063" 1.6 mm 45-11050-16
.071" 1.8 mm 45-11050-18
.079" 2.0 mm 45-11060-20
.087" 2.2 mm 45-11060-22
.102" 2.6 mm 45-11060-26
CHART 5:
TEST AIR CAP KITS –
OPTIONAL
CONVENTIONAL
54-6140-K 11-C KIT
54-6141-K 12-C KIT
54-6142-K 14-C KIT
LVMP
54-6146-K 22-L KIT
54-6147-K 23-L KIT
54-6148-K 24-L KIT
54-6149-K 25-L KIT
HVLP
54-6151-K 31-H KIT – HVLP
54-6152-K 32-H KIT – HVLP
54-6153-K 33-H KIT – HVLP
54-6154-K 39-H KIT – HVLP