32 Biodex Medical Systems, Inc. © 2017
Set total exercise time, rotations per minute (rpm), and enter the user’s weight.
Bodyweight is used for two reasons. The main purpose is to estimate limb size for the spastic
detection (overload) algorithm. The second reason is to estimate, using a standard formula,
the number of calories burned during the exercise session. (Calorie burn rate will probably not
be significant, as the user is seated and the device is assisting with limb movements.)
Press the <Green Arrow> button to begin exercising.
Figure 4.2. Passive Manual Mode— settings screen.
To Next Page
Loading...
