NOTE: If you change the trigger level, the new amount is used for all new tests.
13. After assaying a patient or staff member and accepting the count, press <Save> to save the
information..
NOTE:
When
you
wish
to
perform
an
additional
assay
for
this
patient,
click
on
<Parameters>
and
then
click
on <New Test>.
15. If you click on the arrows under the record number, you can see the record number increase or
decrease and display the appropriate results for each test.
NOTE:
In
order
to
count
a
patient
in
Bioassay,
you
must
select
that
patient
in
the
<Patient
Definition>
window. Select an existing procedure for the patient, then click on Bioassay to display that patient and any test
data.
The
Bioassay
information
is
not
listed
as
a
test,
having
been
performed
in
the
<Patient
Definition>
window.
To
add
a
Bioassay
record
to
the
patient,
click
on
<Parameters>
and
then
click
on
<New
Test>.
CONTENTS
BIOASSAY 7-4
To Next Page
Loading...
