(
%##$)&(*%$)*$)
%@5A1C9>7*5=@5A1CDA5
Do not expose the equipment to a temperature change of more than 5° F (3° C) per hour.
Limits of low and high operating temperature ranges are 59° to 86° F (15° C to 30° C).
CONTENTS
APPENDIX E — E-4 —
Recommended separation distances between portable and mobile RF communications equipment and the BioSway
Balance system. Table 6
T
he BioSway Balance system is intended for use in the electromagnetic environment in which radiated RF disturbance are
controlled. The customer or the user of the BioSway Balance system can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communication equipment (transmitters) and the
BioSway Balance system as recommended below, according to the maximum output power of the communication
Separation distance according to frequency of transmitter [m]
Rated maximum output
power of transmitter [W]
150 kHz to 80 MHz
d = 1.2! P
80 MHz to 800 MHz
d = 1.2! P
800 MHz to 2.5 GHz
d = 2.3! P
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
r
ating
o
f the transmitter in watts (W) according to the transmitter manufacturer.
Note 1. At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2. These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
n
isimetsy
sue htroerByawSoiBe
,wolebdednemmocersamco
aecnatsidno
cinumomcFRelbiomd
ame htotgnidrcot
zHk0 15
.1=d P!2
120.
380.
21.
83.
12
tonrewoptu
zHM80
.1=d P!2
120.
380.
21.
83.
12
dednemmocere
z2.otzHM0 80HG5
.2=d P!3
230.
730.
32.
37.
23
etemnidec
.
2etNo enilediugesehT.
stce