II
Manufacturer's Responsibility
Only under the following circumstances will manufacturer be responsible
for the safety, reliability and performance of the instrument:
All the installation, expansion, readjustment, renovation or repairs are
conducted by the personnel certified by manufacturer.
The storage condition, operation condition and electrical status of the
instrument conform to the product specification.
The instrument is used in accordance with the user’s manual.
About this manual
This manual contains the instructions necessary to operate the product
safely and in accordance with its function and intended use. Observance of
this manual is a prerequisite for proper product performance and correct
operation and ensures patient and operator safety.
This manual is based on the maximum configuration and therefore some
contents may not apply to your product. If you have any question, please
contact us.
This manual is an integral part of the product. It should always be kept
close to the equipment so that it can be obtained conveniently when needed.
The manual is geared for clinical professionals who are expected to have a
working knowledge of medical procedures, practiced and terminology as
required for monitoring patients.
All illustrations in this manual serve as examples only. They may not
necessarily reflect the setup or data displayed on your product.
Conventions:
Bold Italic text is used in this manual to quote the referenced chapter or
sections.
【】is used to enclose screen texts.
→ is used to indicate operational procedures.
To Next Page
Loading...
Need help?
General
