BioSensory SD A1cCare - Page 39

41
9. Collect the reaction mixture in the buer solution tube. The solution volume in the
CVòFSTPMVUJPOUVCFJTDPMMFDUFEDPNQMFUFMZBUV-
10. Apply the sample at the test panel. And then, press the START button.
11. Start the test. The result appears after 3 minutes.
12. When the test is done, pull out the used test panel. The analyzer shuts off
automatically after you remove the test panel.
Discard the used test kits in proper container, according to your standard
laboratory procedures.
* Block the hole.
* Block the hole.